Commscope Solution powered by Andrew Heliax Air Dielectric Cables

specification of andrew heliax air dielectric cables

Andrew Heliax Air Dielectric Cables are available in 1/4″ to 5″ sizes, are designed to give you the lowest attenuation and highest average power rating. When these cables are equipped with the proper pressurization systems, they may be used in any indoor & outdoor environment. Air cables, if used indoors in a controlled environment, do not require pressurization.

Why & the Outstanding Features of Commscope Air Dielectric cables powered by Andrew Heliax are:

Low Attenuation: Low loss dielectric materials combined with high conductivity copper conductors result in low attenuation for efficient signal transfer and maximum system performance.

Solid Copper Corrugated Outer Conductor: Results in low loss, continuous RFI/EMI shielding to minimize interference and maximize system security. Corrugated outer conductor allows for ease of installation.

High Power Handling: Results from low attenuation and excellent heat transfer characteristics.

Weatherproof/Pressure Tight: HJ type cables have silicone gasketed connectors with 1/8″ NPT pressure inlets. Connectors are designed to be pressure tight for maximum protection against water entry.

System Integrity: If a pressurized air-dielectric cable should be damaged, the pressurization system will alarm so that the leak can be corrected before water enters the cable and degrades performance.

Rugged Construction: HELIAX HJ cables are made with the strongest dielectric spacer in the industry, to withstand the stress of installation.

Product range of Air-Dielectric Cables from Commscope Malaysia (Click on part number for product specification)

  1. AL4RPV-50, HELIAX® Plenum Rated Air Dielectric Coaxial Cable, corrugated aluminum, 1/2 in, off white PVC jacket
  2. H5-50, HELIAX® Standard Air Dielectric Coaxial Cable, corrugated copper, 7/8 in, un- jacketed
  3. H7-50, HELIAX® Standard Air Dielectric Coaxial Cable, corrugated copper, 1-5/8 in, unjacketed

The Commscope HJ air cables powered by Andrew Heliax have a polyethylene or polypropylene spacer, and different jacketing materials dependent on fire retardancy requirements. High power HJ series cables use a special fluoropolymer spacer for maximum power handling with excellent attenuation. The cables are ideal for antenna feeder applications such as AM and FM radio, UHF and VHF TV, terrestrial microwave and earth station antenna systems, land mobile and cellular radio, ITFS, MMDS and MDS antenna systems, HF communications, military communications and radar.

Product range of  HJ Air-Dielectric Cables from Commscope Malaysia(Click on part number for product specification)

  1. HJ11-50, HELIAX® Standard Air Dielectric Coaxial Cable, corrugated copper, 4 in, black PE jacket
  2. HJ5-50, HELIAX® Standard Air Dielectric Coaxial Cable, corrugated copper, 7/8 in, black PE jacket
  3. HJ5RPV-50, HELIAX® Plenum Rated Air Dielectric Coaxial Cable, corrugated copper, 7/8 in, off-white PVC jacket
  4. HJ7-50A, HELIAX® Standard Air Dielectric Coaxial Cable, corrugated copper, 1-5/8 in, black PE jacket
  5. HJ7RPV-50, HELIAX® Plenum Rated Air Dielectric Coaxial Cable, corrugated copper, 1-5/8 in, off-white PVC jacket
  6. HJ8-50B, HELIAX® Standard Air Dielectric Coaxial Cable, corrugated copper, 3 in, black PE jacket
  7. HJ9-50, HELIAX® Standard Air Dielectric Coaxial Cable, corrugated copper, 5 in, black PE jacket
  8. HJ9HP-50, HELIAX® High Power Air Dielectric Coaxial Cable, corrugated copper, 5 in, black PE jacket

HL air cables from Commscope cable system utilize a polyethylene spiral to space the inner conductor from the outer conductor, and a fluoropolymer jacket to provide fire retardancy. These cables are intended for indoor plenum type applications.

Product range of HL Air-Dielectric Cables from Commscope Malaysia (Click on part number for product specification)

  1. HL4-50A, HELIAX® Plenum Rated Air Dielectric Coaxial Cable, corrugated copper, 1/2 in, unjacketed
  2. HL4RPV-50, HELIAX® Plenum Rated Air Dielectric Coaxial Cable, corrugated copper, 1/2 in, off white PVC jacket

The HT air cables use a fluoropolymer spiral to space the inner from the outer, and are unjacketed. These cables are  for high temperature and/or high power applications.

Product range of HT Air-Dielectric Cables (Click on part number for product specification)

  1. HT4-50, HELIAX® High Power, High Temperature Air Dielectric Coaxial Cable, corrugated copper, 1/2 in, unjacketed

For inquiry, please contact us as following

Sales & Service Office:
(+65) 66816518

Email:
inquiry@aos.com.sg

Alternatively, you may want to fill up our contact form and we will get back to you as soon as possible.

Our Contact Form